How to Clean Nutribullet Blender?

KitchenMeg is reader-supported. We may earn a commission through products purchased using links on this page. Learn more about our process here.

To make healthy smoothies or blend the masala, Nutribullet plays an important role. While you use it for processing food, you need to clean it. Otherwise, it will not work perfectly.

A Nutribullet includes many parts, and those need to be cleaned individually. But it is not a tough job. Like other kitchen appliances, you can easily wash them.

It is needed for proper care to use it for a long time without clogging.

Though the washing process is not difficult, you can read the guidelines about cleaning a Nutribullet blender. It can help you to wash it smartly.

Can Nutribullet Be Washed?

It is possible to wash a Nutribullet, and you cannot wash its every part in the same way.

The cup of this machine can be washed with a normal dishwasher regularly. But you cannot dip it into hot water because the cup is made of plastic.

Even you cannot immerse the blade into hot water to stay from the damage of the gasket.

How do you deep clean a Nutribullet?

How to clean Nutribullet blender

If you want a Nutribullet fast and deeply, you need to follow the below steps:

  1. Take warm water and add a few drops of dishwater or liquid soap.
  2. Take a sponge or a towel and dip it into the mixer.
  3. Now, clean the outside of the Nutribullet with that towel or sponge.
  4. Now fill the cup with a small amount of warm water, a few drops of liquid soap or dishwasher, one teaspoon of baking soda, and normal water.
  5. Add the lid as well as a blade with a cup and shake it until all the bubbles have dissolved.
  6. Remove the lid and blade from the cup. Rinse these three parts very well.
  7. Then whip them with a dry cloth.

What do You need To Clean Nutribullet Base After Leaking?

It is recommended to clean a Nutribullet base after getting a leakage sign. While you see the leakage, you should stop the blender and unplug it.

You need to wipe it up with a semi-wet towel or tissue paper. Now you can plug it in again for use.

To avoid electrocution, you are told to unplug it. This step saves you and the blender from a short circuit.

How To Clean Nutribullet Blender?

Following are the things needed to clean a Nutribullet blender:

  • A working surface.
  • A toothbrush.
  • Hand gloves.
  • A little mixture of warm soapy water in a bowl.
  • A towel.
  • A flashlight (if necessary).
  • A hand dryer (cool).

It would be best if you detached the jar to wash the chamber of the base. You should not remove any mechanical parts of the power base while cleaning the Nutribullet blender.

Loosen the base to check what you need to clean.

Read Next: How to unscrew the stuck lid of Nutribullet?

 How do I clean the base of my Nutribullet?

You need to clean the base of a Nutribullet while you use it for a long time, or dried food particles are not removed properly from it.

Otherwise, you need not clean the base. You should whip it immediately with a semi-wet towel if you see it is leaking.

Follow the below steps to clean the base of a Nutribullet:

  1. If you see any leakage in your Nutribullet, first switch off and unplug the machine.
  2. Next, detach the blades as well as a cup from the base.
  3. After that, use a semi-wet towel to clean it.
  4. Next, use a brush to clean the outside of the base.
  5. Apart from the blade and cup, you do not need to remove other parts from the base for cleaning.
  6. Before using the Nutribullet, it should be dried.

How To Clean A Pitcher of Nutribullet Blender?

If you do not clean the pitcher regularly, you will face difficulties while you wash it.

The machine comes with a high-speed motor that produces heat while the Nutribullet works. The heat can damage the pitcher though it is made with plastic.

So, if you do not handle the maintenance tasks with care, your Nutribullet can be damaged permanently.

Read Next: Can you put ice in Nutribullet 1200?

How To Wash The Nutribullet Pitcher?

  1. Pour warm water and liquid soap into the pitcher. 
  2. Add the lid tightly on top of the pitcher.
  3. Next, shake it well.
  4. After that, wash the pitcher and its lid properly.

How To Clean The Nutribullet Blades?

Cleaning the blade of a Nutribullet is an easy job. If you keep the blade in good condition, you can wash it properly.

Below is the method to clean the Nutribullet Blade:

  • Take warm water and dishwasher gel. Mixed them well.
  • Now dip a toothbrush in the mixer and remove all the food particles which are stuck. 
  • Now, take normal water. Mix 1 teaspoon of vinegar with it.
  • Then dip the blade into the mixer.
  • After a few minutes, rinse the blade well. You should not use it if it is not dried.

Note: Do not disassemble Nutribullet. Otherwise, the gasket will be damaged.

How To Clean Nutribullet Rubber Seal?

If you use the Nutribullet regularly, you need to clean it every day. The rubber seal is an important part of a Nutribullet.

With this, the machine is sealed tightly, and no liquid spill. Like other parts, you need to clean its rubber seal regularly.

How to clean the rubber seal on your Nutribullet?

While you clean the gasket, you need to use a sponge scrubber. A spongy scrubber and a few drops of dishwasher shop are the main ingredients to wash the blade, but if you find sticky stains, you need a small brush.

If your rubber seal is dirty due to cooking oils or grime, you must dip it into soapy water. It will work like magic.

Conclusion

If you want to keep your Nutribullet in better condition, you should wash it regularly. To do this, you need to know the proper process to clean a Nutribullet Blender. It is important to dry every part after cleaning.

A proper washing process extends the longevity of a Nutribullet. It also helps every part to work perfectly.

Leave a Comment