NutriBullet Lid Stuck: How To Unscrew It?

KitchenMeg is reader-supported. We may earn a commission through products purchased using links on this page. Learn more about our process here.

NutriBullet is one of the most popular smoothie blenders for everyday use. Millions of health freaks are using NutriBullet 900W blender for making healthy drinks. But, sometimes, its lid gets stuck due to vacuum generation.

If your NutriBullet lid is stuck and you’re not able to unscrew it, then read this guide. Here I’m sharing some easy methods to unscrew the NutriBullet blender lid.

Also Check: Best Blender For Dry Ingredients

NutriBullet Lid Stuck- How To Unscrew It?

NutriBullet Lid Stuck

If you’ve just blended veggies and fruit in your NutriBullet but are unable to unscrew it, then follow these steps to get it fixed-

Step #1: Take off the jar from NutriBullet

NutriBullet comes with a cup instead of a lid. The cup has blades, and it blends the fruits and veggies. First of all, remove the blender jar from the NutriBullet power base.

Step #2: Get a bowl of hot water

You need a bowl of hot water. Hot water helps to release the vacuum stuck inside the blender jar. The bowl should be deep enough where you can dip the blender jar. Also, the temperature of the water should be more than 200°F.

Step #3: Dip the jar in hot water

Take the jar and dip the screw side (cup side) into the hot water for 30 to 40 seconds. It will expand the vacuum inside the jar and loosen the lid.

Step #4: Dip in cold water

After dipping for 40 seconds in hot water, dip the jar into the cold water so that you can hold and unscrew with your hand. You can skip this step if you have a towel.

Step #5: Try to unscrew the lid

If the temperature of the lid is lowered, then try to unscrew with your hand. You’ll be able to unscrew the NutriBullet lid easily.

Read Next: What Blenders Do Jamba Use?

What Happens If My NutriBullet Lid Gets Stuck?

NutriBullet is a powerful blender equipped with a 900W motor. If your NutriBullet lid is stuck, then don’t worry; it’s easy to unscrew after dipping inside the hot water for 30-40 seconds.

When you pour some hard veggies and fruits to blend, the powerful motor generates heat, which plastic expands. It results in the lid/cap stuck into the blending jar.

You can follow the above-mentioned steps to unscrew the NutriBullet cap easily. You can also try these steps initially if it is stuck inside the powerbase-

  1. Unplug the NutriBullet from the power source.
  2. Turn the jar upside down with lid closed.
  3. Tap on the top of cap gentlty and try to rotate the cup in counterclockwise.
  4. If it doesn’t pop out, take a hot blower gun and heat the outer shell.
  5. After heating it, rotate in counterclockwise direction and it’ll pop out.

How Do I Remove Vacuum Stuck NutriBullet Lid?

NutriBullet is a handy tool for making smoothies and other blending food. Many people don’t read the product manual, and the NutriBullet cup/lid gets stuck due to a vacuum.

Whenever you pour hot water or hot food inside the blender, it creates a vacuum inside it. Due to the vacuum generated inside, you’ll not be able to remove it easily.

If your blender lid is also stuck due to vacuum, you can follow these methods to remove it-

Solution 1: If the vacuum is stuck in the NutriBullet lid, then you can put some extra force to unscrew it. Also, you can try to extract pressure with the help of a fork.

Solution 2: The easiest method to remove the vacuum from any blender is- to pour the entire blender jar into the hot water for 30 to 50 seconds, then unscrew with the help of a towel.

Can Overloading My NutriBullet Cause the Lid To Stick?

Yes, overloading any blender beyond the maximum limit will cause the lid to stick. It is frequently noticed with the NutriBullet blender because it comes with a powerful motor and generates heat inside the lid. Due to the heat, plastic molecules expand, and that causes the lid to get stuck.

Frequently Asked Questions (FAQs)

How Do You Unscrew a Stuck Lid on Smoothie?

You can apply some extra force and rotate in the counterclockwise direction. If nothing works, pour the lid into hot water for 40 seconds and rotate with the help of a towel.

How do you open a jammed-blender lid?

If you’re unable to unscrew it by rotating in a counterclockwise direction, dip the lid into hot boiling water for 40 seconds, then rotate.

How do you open a stuck Ninja bullet lid?

Ninja bullet lid gets stuck when you blend hot veggie or overload the maximum limit. You can remove the vacuum by pouring it into hot water for 30 to 40 seconds.

Conclusion

Avoid blending hot veggies or fruits in your blender. Also, don’t overload the cup else smoothies get stuck. You can remove the vacuum by pouring it into hot water for a few seconds.

Leave a Comment